Видео

Also a good idea to take a few snap shots of the existing board before replacing the connections one at a time. Thank you for entertaining us (via Micky Mouse's voice)!

The card trick worked first time, many thanks

For mine That white one is broken , it’s too old apartament

Hi, could you advise which bulb to buy? The link brings up a few different options. Tysm.

0:30 There's a TSB for that noise, that's pretty easy to do and it fixed the issue for me. Apply Shin-Etsu grease on a specific point on the strut, and check that your strut mount bolts are tight.

My sister drove my 2012 odyssey and said it felt like being on a boat. So probably that is the problem. Thank u

I may be wrong but it appeared as though your top spray arm isn't rotating.

I would def risk cracking the porcelain because the sarcastic plumber that thinks my perfectly working pipes are outdated wants $400 minimum. Literally insane

Where can I find the zigzag springs to replace on my recl

Hey man thanks for the clear and concise video. Opened it up this morning aaaand.. there was a bobby pin in there -_-

Lifesaver!!!! ❤❤❤ I was gonna tear it all apart but decided to make sure...

my problem was solved with the clockwise screwdriver. thanks!

I'm unclear as to why the entire wiring harness needed to be replaced, rather than just the board ???

He said hair around the shaft!?! Lol 😂

Informative and to the point! Wish all how to videos would be so direct. Nice job and thanks.😊

Do you have a link to the parts? The old link is just the winding bars. I know this is a very old video. Thank you

I try to follow your video brother coz my washing is not working the drain

Just wanted to drop back in and leave a comment. Explaining that this video was the one that helped me save oh about 400 dollars. My dishwashers pump broke as well and your video helped me fix it. For anyone looking for information my pump was still running however the shaft that goes from the motor to the impeller stripped out. So your dishwasher may sound normal but the water isn’t spraying inside the washer. Thus not properly cleaning the dishes inside. Anyway thank you for taking the time to record this repair and posting it to RUclips.

Thank you for the video. Just had that problem. You are the man.

Your hearing the damper door motor opening and closing....

You are a life saver thank you! I was literally looking at new washers thinking I’d have to replace. have a small portable washer and all of a sudden it stopped draining and was just making this humming noise like yours. Did what you did and took apart the drain pump and there was a nail and a bunch of lint in it. Cleaned it out and put it back together and it works good as new again!

OMG! How many miles did your Honda have when you performed the first change? I have two Hondas, a 2006 Ridgeline, and a 2010 Accord V6. I change the tranny fluid every 15000 miles on each and the fluid has never really departed from the pink/red but I still do it. That first batch you removed was disgusting!!!

Very helpful video, thank you!!!

Good morning, sir. Can you indicate which kit you purchased? Thank you and that is an amazing video

Is there a way to pop off the return line after you refill with new fluid and purge the system until fluid comes out clean instead of doing the fluid chamge 3 times? Couldn't you pump out one quart at a time with the line disconnected and refill it until clean..?

Try cleaning out the impeller first. Fixed it for me yesterday without having to replace anything. A small plastic wrapper stuck in the impeller was enough for it to stop water flow entirely

It's a vlog than a guide. Horrible

Well well we'll you WIN!! Your video HELPS!!! Thank you big time!!! I'm happier today because you show the core t way of getting the bulb cover off!!!!!!! YAY!!! 🎉🎉🎉😂😂❤❤😅😊😅😊😅😮😮😮😂😂❤❤

Got a headlight out on the same side. Shold be delivered today so wanted to see if there was anything add about replacing these on the Volt. Thanks for the heads up on everything!

My results were also good. Before the drain and fill, there was a shudder between 2nd and 3rd. I feared the worse. One drain and fill had great results. The next drain will be with engine oil change. As you said, so easy should have done it sooner.

Thanks for the tip, I was able to remove the SD card with a piece of box board👍

Ratatouille? Where would all the hair come from?

Excellent video. I need to do similar. I see the Kit you bought but I don't see the actual bar that you mounted the springs on. Did this come with your kit?, or is this a separate purchase? I really appreciate the time you already took posting this video. Any addition information regarding the parts would be awesome. Thank you

You think the good guys and gals at autozone can handle it? I couldn’t they always helpful but this looks complex

Great video! I really appreciated the opening.

Upset ombre!🤣

the same happend too me

You are wasting your time and mine by adding those short clips!

What a legend, the exact thing i needed was at in this one video

I am replacing my fourth dishwasher since I moved into this house in 2013. My water is very limey, could that be the issue?

I used this pump to replace the pump on a Ecell 3100 PSI pump. ruclips.net/user/postUgkxEU8wdEWW31diRsOawsCNfWEho39M27qd The model # is PWZ0163100.02 for those looking for a matching pump. It went on very easily - 10 minutes at most. Feels like a lot more power than the original but that's to be expected. Can't tell a difference when cleaning with the wand or floor sprayer. Would recommend as it was cheaper than most I found. The maintenance free aspect is definitely a plus too. Have used it through about 6 tanks of gas and have zero issues so far.

Tks a lot a lot ! You saved my life

Mine is a bit different than this, hoping I can get to the impeller backside through somewhere.... Every other video I've found doesn't even attempt to clear any blockage. I'd rather fix than have to find the right pump or even a new dishwasher. I hate that. Thanks😊

ThAnks

Top sprayer isn't working. Thought you should know.

Thanks. Btw that’s a impact wrench, not a torque wrench.

Can’t get either bulb to come out. Don’t know if they are seized on or what. Neither will budge an inch..

For mine I just I took out the bottom and cleans it. it was amana dishwasher and there was some clips and the impeller pops out to be cleaned.

I just replaced the front strut assemblies on my 2011 Odyssey (79k mi) this morning. My shop quoted me $1130 for this job. I spent about $182 on struts from RockAuto and saved myself over $900. It took me about 4 1/2 hrs to complete and trying to get the new struts into place was by far the hardest part of this job. I don't see how one person could install the new strut while holding the knuckle in place so the axle doesn't come out of the trans. Thanks for your vid. (07/06/23)

thanks for the video. I have a 2011 with 225,000 miles, and I don't think the fluid has ever been changed. Definitely shifting hard at times. I've heard if you've gone this long with no trans fluid change, you should just leave it alone. Does anyone know if that is wise?